Beeck Fixative is a primer used on porous mineral surfaces such as lime plaster, lime render, stone and brick before painting with Beeck Mineral paints such as Maxil Pro for interior use and Renosil Fine for exterior use.
It is also suitable as a stabiliser over mineral substrates, which are likely to dust over time if you wish to keep the aesthetic of lime plasters, stone, etc.
Coverage Rate - Approximately 20-25m2 per kg on smooth surfaces, coverage will reduce when applied onto rougher substrates. Beeck Fixative is diluted with 1 part Fixative and 2 parts water before application.
Downloads (opens in new tab)
Product Details
For exteriors + interiors
- Pure mineral (pure mineral potassium waterglass)
- Ideal building physics properties
- Moisture regulating + Ideal for lime plaster and pointing to prevent dusting
- Free from solvents, biocides and preservatives
- UV resistant
- Colourless and transparent
- Mould resistant due to alkalinity
- Promotes a strong adhesion to the substrate
Application instructions
- Carefully cover surfaces which are not to be treated – especially glass, ceramics, window sills, expansion, Joints, lacquer and anodic coatings – and protect them from splashes.
- Ensure sufficient qualified workers and a smooth, uninterrupted coating process.
- Do not use in wet conditions, if there is a risk of frost, on hot surfaces or in the blazing sun.
- Minimum application temperature: +8°C
- Drying time: at least 12 hours per coat
- Protect fresh coats from rain and the blazing sun. Hang up scaffolding sheeting in front of the surface worked on.
Thin 1-part BEECK Fixative with 2 parts water.
- Apply thickly with a Mineral Paint Brush until saturated.
- Carefully spread-out surplus coating in less absorbent areas
Cleaning and storage
-Thoroughly clean equipment, tools and soiled clothing with water immediately after use.
-When stored in a cool, frost-free environment, BEECK Fixative can be kept for at least 18 months.
