Description

DAB Divertron 1000 MESH submersible pump

There is a new and improved 2nd generation of this Divertron pump now available. Please see the DAB Divertron 650 Mesh.

The DAB Divertron 1000M also known as a Leader Divertron 1000 is a high quality 0.9kW multi-stage DAB submersible pump with 3 impellers and electronic flow control (i.e. the pump will automatically pump on demand). The electronic flow control of the DAB Divertron 1000 pump responds to the pressure in the outlet delivery pipe. As the user draws water by opening a tap or similar, the pump starts automatically. When you turn the water demand off, the pump cuts out automatically. It is manufactured with anti-corrosive and rust-proof materials. The motor has thermal overload protection and has 1" threaded inlet and outlet.

The Divertron 1000 MESH DAB submersible pump has a wear resistant shaft, and the excellent water-cooling of the motor allows the pump to operate when fully submerged. Being cooled by the waterbody that the pump is immersed it is quiet in operation.

Supplied with a 15 metre power cable with plug, 2-pin (Schuko) plug, and internal non return valve.

The Divertron 1000M is designed for pumping clean water only. The impeller will be damaged if abrasives and solids are run through it.

The DAB Divertron 1000 model has a maximum head of 36 metres or up to 90 litres per minute maximum flow. It comes with an integral stainless steel mesh strainer to prevent large particles from entering the pump housing, ensuring a longer life. See the technical information for more information on output and the Divertron flow curves. A pressure vessel will help prevent false re-starts due to small pressure leaks.

It is very safe in an outside submerged application, as the pump is totally water proof (to IP68) This makes it especially safe where children are around - for total peace of mind.

Ideal for:

Rainwater harvesting tanks and systems
Surface irrigation systems
Tank to tank transfer applications (see QuickStop Valves to save energy and pump wear)
Above ground tanks in wash down systems
Large garden water butt or rain tanks (over 1000 litres)
Submerged surface and underground installations, wells and boreholes.

NOTE: The Divertron pumps MUST NOT sit on the floor of any water tank (they can be suspended using a suitable lifting cable (not supplied)) and MUST be kept within 15^o of vertical. They must be run submerged. If run out of the water the motor cannot cool properly. Where using in a Rainwater Harvesting (RWH) tank or shallow tanks where operation may take place in low water level conditions for extended periods, the SteelPumps are worth considering. The SteelPumps can run out of the water, or submerged (to max of 5 m submergence depth). If in any doubt, contact us by email for advice.

Pressure Vessel

We highly recommend you fit a pressure vessel to the water delivery pipework (after the pump). Pressure Vessels help increase the life of your automatic pump when there are leaks in your pipe network/taps. Read more about how Pressure Vessels work.

Technical Features

1000M Datasheet (opens in a new window)
DAB Divertron 1000 Quick Guide (opens in a new window)

Please note: All Divertrons are fitted with a 2-pin (Schuko) plug. We strongly recommend that all submersible pumps are installed on a 10A single fused spur and should be installed by a qualified electrician. If you need an automatic pump with a 3-pin plug, please look at the SteelPumps range.