Eico Alterior Matt paint is a high quality, waterbased paint which is manufactured using 100% pure acrylics*. It dries to a non yellowing flat finish and has excellent colour retention properties. Eico Alterior Matt paint is easy to use, has a high opacity and will even adhere to aged alkyd (oil based) paints. This is an environmentally friendly product which is APEO free and gives off very little odour.
View online colour card - Colours online can vary widely depending on screen. We always recommend using a physical colour card and where available ordering a sample pot.
White is used as a base during tinting therefore the tins may be marked as 'Base A'.
Areas of Use
Interior and exterior: Walls, ceilings, roof tiles and primed structural steel.
Substrates: Concrete, masonry, cements, rendering plaster, plasterboard, lining paper, glass fibre, woodwork (primed), etc.
Application
Ensure Surfaces are stable, firm and free from contaminants. On rough surfaces, you can dilute the paint with up to 10% clean water. Air temperature should be over 5º C, preferably above 10º C and relative humidity below 85%, during application and drying. Temperature of surface should be between 5 and 35º C.
Technical Information
- Gloss level: 5 (Flat Matt)
- Coverage: 8-10m²/Litre
- Volume Solid: 38%
- Recoating time: Min. 8 – 10 hours
- Solvent: Fresh Water
- Cleaning of tools: Water
- Drying time: 2 – 3 hours (touch dry) (Depending upon temperature and relative humidity).
Downloads
Technical Data Sheet (opens in new tab)
Safety Material Datasheet (opens in new tab)
*100% pure acrylic produces a superior quality paint. Even though it requires large amounts of energy to create pure acrylic, Eico paints are produced in a factory where the energy comes from 100 per cent free geothermal and hydro-power energy. This means that not only can they control costs, but also the manufacturing process is carbon neutral.
