Graphenstone - Ambient Pro+ Air Purifying Paint

Air Purifying Paint

AmbientPro+ Premium is a highly effective decontaminant of pollutants in towns and cities. It also reduces and eliminates all odours. 

Suitable for use on interior and exterior walls.

It is a lime based paint combined with graphene technology. It decomposes organic compounds and inorganic gases. This is as a result of the impact of light (natural and artificial) on the nanoparticles in titanium oxide, a photocatalyst. 

The graphene fibre technology in the paint make this a tough finish that resists daily cleaning and prevents condensation.

Colour Cards & Samples

As with all paints we strongly advise the purchase of sample pots where available, we also offer colour cards free of charge to help you narrow down the colour for you - Order a Colour Card.

Sample pots are available for the colours in the Grafclean finish but not the Ambient Pro finish. Therefore, there might be very minor discrepancies in colour between product ranges due to differing bases and pigments used.

Benefits

• Photocatalytic
• Decomposes pollutants including NOx, VOCs, CO, SOx and formaldehydes
• Eliminates odours
• Air Purifying Paint
• Absorbs CO₂
• Excellent hiding power
• Over 98% whiteness
• Matt finish
• Very Low VOC, < 1 g/l
• Very Breathable, SD value: < 0.14 m
• Tough and long lasting
• Formaldehyde free
• Excellent Washability: Class 1
• Excellent flexibilty - non cracking formula
• High adherenCe to substrates
• Fire performance: A1 (EU), Class 0 (British Standard)
• Cradle to Cradle Certified GOLD (White), SILVER (Colours)
• GreenRate Certified^TM Level A
• Environmental Product Declaration

Drying time: Quick drying 2-4 hours between coats, 24 hours until fully dry, 30 days until fully cured.
Approx coverage: 12-18m2 per Litre (supplied as a concentrate - dilute 5-10% with water before application).

Further Information:

Mineral substrates must be at least 28 days old before application. Substrates must also be resistant to high alkalinity. If in doubt apply to a test area first.

Do not apply to surfaces in constant contact with water.

Total curing occurs during the first 30 days. We recommend to avoid cleaning and/or rubbing the painted surface during that time.

For more detailed information, download the Graphenstone datasheets:

(All pdfs open in a new tab).

• Ambient Pro+ Premium Technical Data Sheet
• Ambient Pro+ Premium Safety Data Sheet (MSDS).

Other documentation and certification:

(All pdfs open in a new tab).

• REACTION AGAINST FIRE - A1 (Report No: 18.203 under Regulation (EU) No. 305/2011 for Fire classification)
• Cradle to Cradle GOLD Paints & Fillers - Certificate
• Cradle to Cradle Health GOLD - Certificate
• Global Green Tag LEVEL A - Certificate
• GreenTag Health PLATINUM - Certificate
• Sensitive Choice Approved - Certificate
• Sustainable Building Certification (VERDE, LEED v4, LEED 2009, BREEAM) - Certificate
• Environmental Product Declaration - verified and registered document that communicates transparent and comparable information about the life-cycle environmental impact of products. The International EPD® System is a global programme for environmental declarations based on ISO 14025 and EN 15804.

Cleaning tools

Rollers, brushes and spray guns should be cleaned with warm water after use.

Packaging and Waste Management

Graphenstone Paint pots are made of polypropylene (PP) - number 5 in the recycling triangle code - and are therefore 100% recyclable. The plastic polypropylene pots that Graphenstone use are made of 80% recycled content.

Please recycle or reuse empty pots according to your local waste and recycling scheme. If you have leftover paint please consider these ideas for using up or donating leftover paint. Please dispose of leftover paint responsibly (paint should never be put down the drain).

Colours

Ambient Pro+ Premium is available in White and 14 stunning pastel shades: Argento, Briar Rose, Cassium, Chiffon, Clotted Cream, Glacier, Ivory, Pearl Barley, Pebble, Porcelaine, Provencal, Straw, Wheaten and White Linen.

Complete the look

• GrafClean - Indoor paint suitable for areas that require constant cleaning (more like an acrylic paint).
• GrafClean Mid Sheen - Higher sheen (10%) version of the original GrafClean (Ultra Matt) paint. Perfect for woodwork and metal (interior and exterior).

How to prep walls for painting

See the Ambient Pro+ Premium Technical Data Sheet (above) for full details, however in brief:

For all surfaces

• Ensure the substrate is dry, sound and clean.
• If the substrate has salt deposits, brush and apply Graphenstone Neutralysal Premium.
• If the substrate contains a high moisture level, apply Graphenstone StopWater Premium.
• For previously painted walls, when applying over glossy paint, sand the surface lightly to create a "key".
• Remove flaking and unstable paint. Create a uniform surface with Graphenstone Filler Primer

For unpainted surfaces

You can prime walls with:

• Graphenstone Ambient Primer L42 - primer for interior walls and ceilings.
• Graphenstone Minerseal Premium - for very absorbent surfaces ie clay, adobe, rammed earth etc and for consolidating dusty mineral surfaces.
• Graphenstone Four2Four Premium - for wood, metal or non porous surfaces such as ceramic tiles.

How to prepare Graphenstone Ambient Pro+ Premium paint

Stir and dilute with water to 5-10% of the product weight (100-150 ml of water per litre of product approx.), ensure a homogeneous mixture. Avoid excessive shaking to minimize bubbles.

Apply 2 or 3 coats evenly by roller, brush or airless spray gun.
Note: an excess of product by layers can generate micro-cracks.

You may also need Brushes or Rollers, Masking Tape and Paint Trays - see our Painting Accessories page.