The Loft Lid is a simple solution for the safe installation of downlights in a loft space.
The Loft Lid creates a protective barrier or cover over downlights ensuring loft insulation does not directly contact the light fitting and that there is sufficient ventilation around the light for heat dissipation.
The Loft Lid also eliminates heat loss and air leakage into the loft space and allows for a continuous layer of insulation to be laid over the top of the lid to comply with current building regulations.
The unique shape enables the product to be easily installed even when downlights are located close to roof joists or trusses and provides sufficient volume for all major brands of downlighters up to a maximum power rating of 50W*.
The Loft Lid also creates an effective dust, acoustic and pest/insect seal and is extremely easy to install. Better still it is designed and manufactured in the UK, made from fire retardant material and has been tested and approved to British Standards by the UK Lighting Industry Association.
Suitable for all downlights with a max power of 50W* and with dimensions less than the above internal dimensions
Benefits:
- Easy to install
- Reduces heat loss and drafts through ceiling
- Reduces the risk of downlights overheating
- Provides sufficient volume for all major brands of downlighters up to a maximum power rating of 50W*
- Complies with current building regulations and tested to all relevant British Standards
- Made from fire retardant material
- Tested and approved to British Standards by the UK Lighting Industry Association.
- Designed and manufactured in the UK
* Please note that Dichroic bulbs are NOT suitable for use in a loft. Please check the lamp manufacturers installation instructions to ensure the Loft Lid is suitable.
Documentation:
Useful additional Information:
- Downlight Safety (Electrical Safety First) pdf
- Safely Installing Downlighters (Electrical Safety First) pdf
FAQs
Which Standards does the Loft Lid conform to?
Tested (with a 50W downlight) and Approved to:
- BS EN 60695-2-11
- BS EN 60695 -11-5
- BS EN 60598-1 (Clause 12.4)
- IP6X
What Do You Do With The Transformer?
The general rule of thumb is: If the lamp has a halogen bulb place the transformer outside the Lid and above the insulation, if the bulb is LED then put the transformer inside the Lid.
Is the Loft Lid Fire Rated?
The Loft Lid is made from fire retardant material and, as it is specifically designed for use in a loft, it is not required to have a fire rating. The Loft Lid conforms to all current UK building regulations and relevant European/British standards when installed correctly in a loft.
